Last two plain purlins over the garage area plus the second tricky purlin over the PFC with the interruptions from the columns above sockets
Then finished off all outstanding bolting at the very front cleats (photos taken before bolting finished)
Organised with Ross to install sockets on extreme LHS and RHS of back wall so that on main level can fit a "curtain wall" ( ie door and window spaces do not need to take structural loads).
Will be able to install columns with PFC header at 0m, 4m, 6m and 10m (after discussions with Patrick the Structural Engineer)
We are doing this because we have not had any luck so far scoring an appropriate set of cabinetry for the 10 m expanse of doors and windows - need to get the wall structure in first - then sit back and work out how we want to fill in the back wall.